TM 5-3895-374-24-1 4-ADJUSTMENTS This mode enables display and adjustment of all the speed controller’s setting parameters All the parameters can be adjusted at any moment, whether the speed controller is on stop or running Depending on the selections made in CONFIGURATION, INPUTS-OUTPUTS and SPEC FUNC- TIONS modes, some parameters in the list below may not appear on the terminal screen Parameters which are always present are marked with an asterisk ’ Parameters which appear Speed Explanations on the screen controller code Acceleration ACC Acceleration time Deceleration dEc Deceleration time Low speed LSP Low speed High speed HSP High speed U/F adjustment UFr Adjustment of the U/f ratio I thermal ItH Motor thermal current Stability StA Stability Slip comp. Slip compensation Preset Speed 1 Preset speed ^n° 1 Preset speed 2 Preset speed ^n° 2 Preset speed 3 Preset speed ^n° 3 Preset speed 4 Preset speed ^n° 4 Preset speed 5 Preset speed ^n° 5 Preset speed 6 Preset speed n* 6 Reduce volts Reduction of motor voltage (page 3-259)