TM 5-3895-374-24-1
Commissioning terminal
Choice of control or
This choice is accessible from the previous level by pressing the key ENT .
adjustment modes
There are 8 of these modes, accessible by scrolling down using the keys .
- CONFIGURATION
- INPUTS-OUTPUTS
Configuration
- SPEC. FUNCTIONS
- ADJUSTMENTS
- PRST FAULTS
- FACTORY SETTINGS
- CUST. SETTINGS
- TERMINAIL CONTROL
Reversion to the previous level Is obtained by pressing CLR .
NOTE if the multidrop serial link communication option board is being used, an additional mode
exists SERIAL LINK Refer to the user’s manual supplied with the option.
Choice of variables
A control or adjustment mode having been chosen, access to the list of variables is obtained by
to be modified
pressing ENT and scrolling down of the variables by pressing .
Reversion to the previous level Is obtained by pressing CLR .
Modification of a
Access to adjustment is obtained by pressing DAT , an arrow appears at the start of the 2nd
variable or
line, modification of the variable is obtained by pressing .
a parameter
Example:
Acceleration
12.3 s
Recording of the new value is obtained by reversing to the list of variables, key PAR .
Key CLR enables reversion to the list of parameters, without taking into account the modification.
(page 3-253)
}
