TM 5-3895-374-24-2
955-257
5.15 STATUS RESPONSE
Every command from the host computer causes the controller to generate a two ASCII HEX character status report as
part of its response. Normal state (0) is assumed to be normal controller operation.
BIT
ABNORMAL CONDITION "1"
T
Transmission Error
C
CKSUM Error on received Data
S
Syntax Error or Illegal Input
D
Communications Turned OFF
P
Parity Error on received Data
R
INPUT OPEN
A
Alarm Condition (Relay 1 and/or Relay 2)
U
Reserved
5.16 PROTOCOL EXAMPLE-READ
A command to READ the measurement of Unit Number 23 would be:
The controller response to the READ command if the measurement were 542 degrees would be:
ECLIPSE INSTRUMENTATION DIVISION
page 3-1114
