TM 5-3895-374-24-2
5.13 CONTROL COMMANDS-PROCESS STATUS (PSW)
The USER may READ or WRITE the Process Status (mnemonic PSW) as two ASCII HEX characters. Before
WRITING a new command, you must first read the existing command data bits. All data bits you do not wish to
change MUST be repeated in the new command including bits designated RESERVED.
BIT
O STATUS
1 STATUS
7
Stop
Start (Models 2000, 2001 and 2003 only)
6
Manual Control
Auto Control (Models 2002 and 2004 only)
5
Normal
INPUT OPEN (READ only)
4
Normal
DATA LOST (READ only)
3
"REM" flashing
"REM" full on
2
ALM/Timer 2 OFF
ALM/Timer 2 ON
1
ALM/Timer 1 OFF
ALM/Timer 1 ON
0
Reserved
Reserved
5.14 CONTROL COMMANDS-CONTROL STATUS (CSW)
The USER may READ or WRITE the control status (mnemonic CSW) as two ASCII HEX characters. Before
WRITING a new command, you must first read the existing command data bits. All data bits you do not wish to
change MUST be repeated in the new command including bits designated RESERVED.
BIT
O STATUS
1 STATUS
7
Reserved
Reserved
6
Reserved
Reserved
5
Reserved
Reserved
4
Normal
Timer Override (Mods 2000, 2001 and 2003 only)
3
Reserved
Reserved
2
Reserved
Reserved
1
Reserved
Reserved
0
Reserved
Reserved
ECLIPSE INSTRUMENTATION DIVISION
page 3-1113
