TM 5-3895-374-24-2 APPROVALS UNDERWRITERS LABORATORIES INC. ACCEPTABLE BY: INDUSTRIAL RISK INSURERS. (I.R.I) LISTED: GUIDE #GUIDE MCC2 FACTORY MUTUAL APPROVED FILE: #MP1537 CANADIAN STANDARDS ASSOCIATION FILE #LR 7989 INSTALLATION Caution: Remove power to the  control  and  remove  the  FLAME-MONITOR  from  it’s  wiring base before preceding.  ACCEPTABLE BY: INDUSTRIAL RISK INSURERS.  (I.R.I.) FACTORY   MUTUAL   APPROVED   Fireye   FLAME- MONITOR  Programmer  Modules  are  used  with  Fireye Series  EB700  base  chassis.    They  are  installed  in  the chassis  by  simply  inserting  the  module  into  the  second slot  on  the  control.    This  slot  is  marked  "Programmer Module" on the side of the chassis. Programmer Modules are  designed  to  fit  only  in  the proper   slot.      They   cannot   be   snapped   into   place   if inserted in the wrong location.  DO NOT FORCE THEM. ORDERING Programmer Module Part No. Used With Purge Ignition Timing FFRT* EP260 EB700 30 Sec. PTFI MTFI Term 5 10 Sec. 10 Sec.. 4 Sec Term 6 10 Sec. 15 Sec. EP261 EB700 30 Sec. PTFI MTFI Term 5 10 Sec. 10 Sec.. 4 Sec Term 6 10 Sec. 30 Sec. EP270 EB700 30 Sec. PTFI MTFI Term 5 5 Sec. - 4 Sec Term 6 10 Sec. 10 Sec. *FFRT is the Flame Failure Response Time. NOTE: All modules have a recycle running interlock circuit (3/P) (page 3 - 1068)