TM 5-3895-374-24-1
Chapter 5
Installing Your Hardware
Components
2.
Gently slide the module m until both top and bottom retainer clips are
secured.
3.
Install a wire tie to secure your wiring and keep it neat (If you feed the
tie into one hole, it will be routed back out through the other.)
4.
Cover any unused slots with card slot fillers (Catalog Number 1746-N2)
to keep the chassis free from debris and dust.
5.
To remove the module, press the retaining clips at the top and bottom
of the module and slide the module out
(page 3-412)
