TM 5-3895-374-24-2
Care and maintenance
1.
Inspection and exchange of oil, grease
1-1 Gearbox
The oil in the gearbox can be used semi-permanently if the hoist
is used at a normal frequency. However, in case it is used at a
high frequency, exchange oil for new oil, depending on the deterio-
ration of the oil in the gearbox.
Use gear oil designated by KITO.
Similar oil: Meropa Lubricant No. 320 made by Texaco Oil Co. or
Caltex Oil Co.
1-2 Drive units of trolley
The following parts of motorized trolleys and geared trolleys
should be oiled from time to time.
• Tooth part of pinion and wheel .......................................grease
2.
Cleaning of and coating of oil to load chain
Clean the load chain once in a while and coat it lightly with oil
(machine oil or gear oil) to assure the chain of long service life
and safe operation.
3.
Storage
1)
Do not expose the hoist to rain or dew.
Do not store it in a humid place.
2)
When the hoist is installed outdoors cover it or move it
back under the roof after use.
3)
To store the hook suspension type, hook it on the wall or
hang it from the ceiling.
(page 3 - 892)
