TM 5-3895-374-24-2
2. The correct load chain set up is that the weld of each link face
outward as shown in Fig. 11. When you replace a load chain, set
it up correctly with respect to the welds.
Fig. 11
12. Precautions concerning wiring work
In case cover is removed for wiring work, do not touch energized
parts with hand, as condensers are charged if energized once
even after current supply is cut.
After cutting power supply, never fail to press either of the push
button ÑÒ to discharge the condensers.
(page 3 - 891)
