TM 5-3895-374-24-1
Initial setting up
Display of settings
With the CONFIG selector switch in position 1, and without a push-button being pressed,
and electrical values
the various displays possible are as follows
Speed controller on stop
Speed controller ready
Possible fault, see list and meanings, pages 51 and 52
Speed controller ready with serial communication option board
After switching on
Value of the frequency reference, or another parameter selected
during the previous operating period For example
Motor current
displays possible during operation
D C braking: braking by DC injection validated
This code shows that the braking command has been accepted
Overbraking excessive braking causes capacitor overvoltage
The deceleration time must be increased
(page 3-192)
