TM 5-3895-374-10
Phase rotation must be: L1-A, L2-B, L3-C industry standard Black, Red, Blue phasing.
Grounding of MCC #1 and MCC #2 by NEMA standards.
2-9. Operator Controls
The operator’s controls are contained on four panels and one monitor in the control van. The four panels are labeled as
"A", "B", "C" and "D". The content of these four panels are listed below and are sequenced from left to right and top to
bottom.
Reference
Label or Position
Figure
A
Feeder Panel
2-33
B
Motor Control Panel
2-34
C
Corner Panel
2-35
D
Burner Control Panel
2-36
Panel "A" - Feeder Panel
#
Control
Indicator
Function
1
Feeder 1:
Indicates relative feed rate.
percent speed
2
Feeder 2:
Indicates relative feed rate.
percent speed
3
Feeder 3:
Indicates relative feed rate.
percent speed
4
Feeder 4:
Indicates relative feed rate.
percent speed
5
Asphalt
Indicates relative asphalt pump speed.
Metering
Pump:
percent speed
6
Feeder 1
Green when
manual - off- auto.
running
7
Feeder 2
Green when
manual - off - auto.
running’’
page 2 - 72
