TM 5-3895-368-14&P APPENDIX A UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST SECTION I.  INTRODUCTION 1. Scope This RPSTL lists and authorizes spares and repair parts; special tools; special test, measurement, and diagnostic equipment (TMDE); and other special support equipment required  for   performance   of   Unit,   Direct   Support,   and General   Support   Maintenance   of   the   Asphalt   Melter, Model   STMD-3000A.      It   authorizes   the   requisitioning, issue, and disposition of spares, repair parts and special tools   as    indicated    by    the    source,    maintenance    and recoverability (SMR) codes. 2. General. In  addition  to  Section  I.    Introduction,  this  Repair  Parts and   Special   Tools   List   is   divided   into   the   following sections: a. Section  II.    Repair  Parts  List.    A  list  of  spares and  repair  parts  authorized  by  this  RPSTL  for use in the performance of maintenance.  The list also  includes  parts  which  must  be  removed  for replacement  of  the  authorized  parts.    Parts  lists are composed of functional groups in ascending alphanumeric  sequence,  with  the  parts  in  each group listed in ascending figure and item number sequence.      Bulk   materials   are   listed   in   item name sequence. Repair kits are listed separately  in  their  own  functional  group  within Section  II.    Repair  parts  for  repairable  special tools  are  also  listed  in  the  section.    Items  listed are shown on the associated illustration(s)/figure(s). b. Section  III.    Special  Tools  List.    A  list  of  special tools,  special  TMDE,  and  other  special  support equipment authorized by this RPSTL (as indicated  by  Basis  of  Issue  (BOI)  information  in DESCRIPTION AND USABLE ON CODE column) for the performance of maintenance. c. Section  IV  Cross-reference  Indexes.    A  list,  in National Item Identification Number (NIIN) sequence, of  all  National  stock  numbered  items appearing   in   the   listing,   followed   by   a   list   in alphanumeric    sequence    of    all    part    numbers appearing;     in     the     listings.          National     stock numbers and part numbers are cross-referenced to    each    illustration,    figure    and    item    number appearance.  The figure and item number index lists  figure  and  item  numbers  in  alphanumeric sequence   and   cross-references   NSN,   CAGEC and part numbers. 3. Explanation of Columns (Sections II and III). a. ITEM NO.    (Column  (1)).    Indicates  the  number used to identify items called out in the illustration. b. SMR     CODE     (Column     (2)).          The     Source, Maintenance,  and  Recoverability  (SMR)  code  is a 5-position code containing supply/requisitioning    information,    maintenance category   authorization   criteria,   and   disposition instruction, as shown in the following breakout: * Complete Repair: Maintenance capacity, capability, and authority  to  perform  all  corrective  maintenance  tasks  of the "Repair" function in a use/user environment in order to restore serviceability to a failed item. (1) Source  Code.    The  source  code  tells  you how to get an item needed for maintenance, repair, or overhaul of an end item/equipment.      Explanations   of   source codes follows: A-1