TM 5-3895-374-24-2
pump dimensions
how to specify
SIHI.
Horizontal,
Self
Cooling
Centrifugal Pump(s) Model ZTN
AN.002.06.2
mounted on a baseplate complete with (spacer type’)
coupling, coupling guard and motor. Optional
Pump Materials:
Casing and cover
--ductile iron
Impeller
--cast iron
Shaft
--400 series stainless steel
Radial shaft seal rings
--viton
Single suction back pull-out designed pump must be
suitable for handling heat carriers at temperatures up to
608° F. (320°C.) without the need of external cooling.
The heat barrier design shall limit the temperature in the
radial shaft seal area to 212° F. (100° C.) The foot
mounted casing shall have a horizontal suction flange
and a vertical discharge flange drilled to ANSI 150 lb.
requirements The pump shall be fitted with an enclosed
impeller, mounted on a stainless steel shaft, supported
by a sleeve rearing and ball bearing.
Operating Characteristics:
Pump:
Capacity
USGPM/m3/hr., Total Head
Ft./m. Speed
RPM,
Power
BHP/kW, NPSHA/R
Ft./m, Suction Pressure (gauge)
PSI/kPa,
Specific Gravity
Liquid
Temperature
°F./°C.,
Operating Viscosity
, Start-Up Viscosity
.
Motor:
HP
, RPM
, PH
, HZ
, Volts
, Enclosure
.
(page 3 - 1139)
