TM 5-3895-374-24-2 SECTION VI MAINTENANCE SERVICE INTERVAL MAINTENANCE OPERATION Operating Hours/Months - whichever comes first 500/3 1000/6 1500/9 2000/12 2500/15 COMPRESSOR Frame Oil Level - Check Weekly Air Inlet Filter - Inspect and Clean Monthly Inspect Oil for Contamination Monthly -Change if necessary Petroleum Lube X X X X X Frame Oil-Change XL-T30 1500/2 Inlet Unloader Piston O-Ring -Lubricate O-Ring with Lubricant capable of 200F X Compressor Valves - Inspect, Clean or Replace X Intercooler Clean Exterior Monthly Low Oil Level Switch - Check Operation X X X X X Operate Safety Valves - Manually Monthly Clean Cylinder Cooling Fins Monthly V-BELT DRIVE Belt Tension - Check Monthly MOTOR Motor Bearings - Check and Lubricate X Clean Monthly-(Weekly in Dusty Locations) AFTERCOOLER Air cooled: Clean externally Monthly-(Weekly in Dusty Locations) Clean air flow internally X RECEIVER Drain Condensate - Manual DAILY Operate Safety Valves MONTHLY GENERAL Tighten or check all bolts MONTHLY Check for Unusual Noise and Vibration DAILY Inspect for Air Leaks MONTHLY This   machine   contains   high   pressure air.   Can   cause      injury   or   death   from flying parts. Always release pressure from compressor and air receiver before removing caps, plugs, fittings, covers; etc. Hazardous voltage. Can cause severe injury or death Disconnect main power before servicing compressor. page 3 - 840