TM 5-3895-374-24-2
Extended Shutdown/Storage
If the conveyors are to have an extended shutdown or storage (beyond one month) the following should be performed:
1)
Insure all foreign material is removed from the conveyor and surface coatings are in good order.
2)
All bearings and drives are lubricated and protected per manufacturers instructions.
3)
Screws are rotated every two weeks.
4)
The conveyor is protected from weather, moisture, and extreme temperatures. Do not use plastic or other
coverings which promote condensation under the covering.
5)
All exposed metal surfaces are coated with a rust preventative oil that is applied per instructions.
6)
Prior to start-up, inspection and service instructions contained in this manual must be performed.
page 3-754