TM 5-3895-374-24-1
Connections
Freewheel stopping
Functions of the
control inputs
- Deceleration without ramp, speed controller locked
t1 depends on motor speed, machine inertia and resistive torque
Do not give the run command before the motor has completely stopped
Fast stopping
The deceleration time is divided by 4 with a minimum of 0,2 s, depending on load conditions
of the motor-speed controller combination.
Input LI1 (freewheel stop) has priority over L12 (fast stop).
Other functions
It is possible to assign the logic Inputs to functions other than those described above Refer to
the 2nd part of this document "Special applications" (p 81).
(page 3-177)