TM 5-3895-374-10.................................................................................................................................................. INFORMATION display/alarmsThe alarm annunciator display is shown in Figure 0.5.During normal operation this area is usually blank. Possible messages in this area include:’-Motors OFF- -HOLD’---The virgin feeder collector belt is off so it is assumed all motors are off, i.e., the process is not running.’FeederOverspeed ’---The target rate requires a feeder to run at greater than its maximumspeed. During this message the feeder speed is limited to itsmaximum so insufficient material is being delivered and correctivemeasures should be taken.’Material Feed ERROR’ --The feeder no flow alarm indicates a lack of material flow.’SHUTDOWN STARTED’-- A deviation exceeds the user established limit and the process willautomatically stop if the alarm continues to persist uninterrupted forthe shutdown time established by the user for this condition.’A/C Pump Overspeed’---The target asphalt rate requires the asphalt pump to run at greaterthan its maximum speed. During this message, the pump speed islimited to its maximum so insufficient material is being delivered andcorrective measures should be taken. This message applies only topump’s driven by variable speed electric motors.’Fines Inject Error’---The fines delivery systems is not running when needed by the mixformula in effect.page F - 19SYSTEMS Equipment Corp8/31/89Page (11)
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
