TM 5-3895-374-24P
RECOMMENDED SPARE PARTS
To prevent unnecessary delay and loss of production due to a faulty component, we highly recommend that these spare
parts be ordered.
NOTE: When ordering spare parts, include the CEI Heater Model and Serial Number.
1.
Air Flow Switch
18.
Nozzles
2.
Temp. Controller
19.
Fan Wheel, Burner
3.
Thermal Couple
20.
Valve Body
4.
Thermal Overloads
21.
Actuator, Gas Valve
5.
Fireye E-100 Chassis
22.
Valve, Fuel Oil Solenoid
6.
Program Module EP-260 Fireye
23.
Pump, Fuel Oil
7.
Amplifier Fireye
24.
Nut, Impeller
8.
Scanner UV1 Fireye
25.
Lock Washer
9.
Relay Control (4K)
26.
O-Ring
10.
Cable. Gas Ignition 3 ft.
27.
Bearing, Ball
11.
Cable, Oil Ignition 6 ft.
28.
Bearing, Sleeve
12.
Electrode, Oil Ignition
29.
Seal Rings, Radial
13.
Transformer, Oil Ignition
30.
Cartridge, Fuel Filter
14.
Transformer, Gas Ignition
31.
Coupling, Fuel Pump
15.
Motor. Burner
32.
Coupling, Circulating
16.
Starter Interlocks (595-A)
Pump
17.
Starter Coil
33.
By-Pass Regulating Valve
(Fuel Oil)
34.
Damper Motor
For your convenience CEI has available a "Spare Parts Kit". which contains the necessary components, from the above
list, for each CEI Heater Model.
CEI also tlas available a "Conversion Kit" for converting oil or gas fueled burners to combination burners. Installation of
this Conversion Kit would allow operation of the burner on fuel oil or gas by turning the selector switch to the desired fuel.
Refer to the parts list on the next page for the correct part number for ordering spare parts.
page C7 - 2
