TM 5-3895-374-24-1
CHAPTER 2
PREPARATION FOR USE BY RECEIVING ACTIVITY
2-1
General
All Asphalt Mixing Plants produced by WRT Equipment Ltd. receive a thorough inspection by the Quality Assurance
Department throughout the manufacturing process However, for your own safety we recommend that each unit be
inspected prior to operation to check for damage that may have occurred or developed while the plant was being delivered.
1.
Walk around the unit and check for damage that may have been caused in transit.
2.
Check for fluid leaks
3.
Check operation of trailer lights
4.
Check operation of trailer brakes
5.
Check tire pressure
6.
Check all bolts and nuts.
7.
Operate the unit only if authorized to do so
NOTICE
FAILURE TO COMPLY WITH RECOMMENDED SERVICE
PROCEDURES WILL VOID WARRANTY CLAIMS.
2-2
Lubrication
Each unit has been completely serviced prior to shipment. Further lubrication should not be necessary. See Appendix A,
Unit PMCS and Chapter 3 of the Operator’s Manual
Page 2-1
