TM 5-3895-374-10
options .................utilities ............ calibration ............meters .................................................. EDIT METER Calibrations
<8>
<6>
<5>
<.00>
The Meter Calibrations display in the EDIT mode is shown in Figure 865.1The only apparent difference from the previous
display is in the continuation options display. The flashing edit cursor is initially shown following the Virgin scale zero
calibration value.
The aggregate belt scale speed is shown in pps (pulses eer second) at the bottom of the display. This data is shown as
measured by the speed pickup and cannot be edited.
The Continuation Options are:
OPTION
KEY
DESCRIPTION
ESCape
ESC
Return to the previous display.
Edit
(all)
Edit the values shown on the screen in the usual
manner using the techniques and features
described in Appendix A of this manual.
page F - 67
SYSTEMS Equipment Corp. 8/31/89 Page (36)
