TM 5-3895-374-10options ...........................................................................................................................MATERIAL USED display<6>The Material Use subscreen is shown in Figure 6.0. Note that this screen overlays the right third of the Main OperatingScreen. All data on plant operation continues to be updated every second on the entire screen. The totals shown withinthe Material Use subscreen are also updated every second.The tonnage shown is aligned on the display with the device to which it corresponds. For example, the VirScale tonnage isshown to the right of the VirScale dTPH rate display. In like manner the volumetric tonnage delivered by each feeder isshown.NOTE:Feeder totals are calculated from the feeder rate signal in use. For feeder rates deduced from the desiredtarget value the accumulated total is the desired target total and is not a measured value. For volumetricallymeasured rates the accumulated total is in volumetric tons. For weighed rates the accumulated total is inweighed tons.All usage is in tons accumulated since the totals were last cleared to zero.The Continuation Option is:OPTIONKEYDESCRIPTIONESCapeESCReturn to the Main Operating Screen.page F - 38SYSTEMS Equipment Corp .8/31/89 Page (21)
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
