TM 5-3895-374-10
II.
HAZARDS AND RECOMMENDATIONS
Table 1-1. Hazards and Recommendations
1.
Control Van
HAZARD
DESCRIPTION
RECOMMENDATION
High voltage
All electrical switch-gear are
Operate and maintain in
electrical
located in this unit and all
accordance with all safety
power cables are attached to
procedures. Do not perform
the power source in the van.
repair work without a qualified
electrician.
The trailer air brake system is
Maintain system in good
Compressed air
comprised of air lines, tanks
operating condition. Release
and valves which activate the
air pressure prior to repairing
trailer brakes.
the system.
2.Four Bin Feeder
HAZARD
DESCRIPTION
RECOMMENDATION
Noise
Aggregate materiels loaded
Use of ear protection.
into the four bin feeder by a
front end loader may cause
intermittent noise levels
exceeding 85 dba.
Operating
V-Belt drives and moving
Use of guards during
machinery
conveyor belts.
operation. Operator should
not wear loose fitting clothing.
High voltage
Power cables.
Avoid contact when energized.
electrical
Maintain in good condition.
Use cable supports provided.
Do not perform repair work
without a qualified electrician.
Fluids under
Hydraulic cylinders, lines and
Maintain lines in good
pressure
valves.
operating condition. Wear
protective clothing while
operating the plant. (gloves,
coveralls, safety glasses, hard
hat)
page 1 - 3
