TM 5-3895-374-10
2.
Use of all safety devices and guards provided with the plant.
3.
Personnel must wear the following protective items at all times.
Coveralls (not loose fitting)
Safety glasses with side shields
Insulated gloves - non-asbestos
Hard hat
Safety shoes
4.
Routine maintenance procedures to be followed at all times. Maintain all equipment in good operating condition.
This includes but is not limited to:
Fuel Lines
Asphalt Lines
Hot Oil Heating Lines
Hydraulic Lines
Electric Cables and Connectors
Air Lines
5.
Restrict entry to all confined spaces except for authorized and scheduled maintenance inspections. Establish a
confined space entry SOP IAW DHEW (NIOSH) Publication No. 80-106 (provided with AMP) when maintenance
requires work in a confined space. This SOP must be coordinated with your local medical (preventive medicine)
authority. Prior to entry test for fumes and make provision for proper ventilation. Never work alone. Always use
the buddy system when working in confined spaces.
6.
Do not operate equipment in an enclosed area unless all exhaust fumes are safely vented away from the work
area.
7.
Army Field Manual (FM) 21-10 must be followed if the AMP is operated in conditions that expose its operators and
maintainers to heat stress conditions.
NOTE
The following potential hazards are listed to notify of situations to be avoided during the operation
of the plant Recommendations are Included to provide the necessary information so that these
hazards may be avoided.
page 1 - 2
