Remove the four bolts securing the backplate to the burner.
Remove the Burner Atomizer Assembly.
Loosen the jam nut on the backplate of the Burner Atomizer Assembly.
Rotate the backplate to effect the required retraction or extension of the atomizer. One full rotation of the
backplate will move the atomizer approximately 0.1".
Once the proper positioning of the atomizer is completed:
Tighten the jam nut.
Install the Burner Atomizer in the burner with the four nuts.
Attach the Burner Atomizer Assembly to the oil manifold, using the union provided.
Open the oil valve upstream of the shutoff solenoids.