• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
CHAPTER 3 MAINTENANCE INSTRUCTIONS - TM-5-3895-374-10_161
Drum Mixer - TM-5-3895-374-10_163

TM-5-3895-374-10 Paving Machine Bituminous Material: Crawler Mounted Diesel Engine Driven Manual
Page Navigation
  147    148    149    150    151  152  153    154    155    156    157  
TM 5-3895-374-10 6. MIL-L-17331 is suggested for a compressor requiring 100 to 150 CST viscosity non-detergent oil. 7. VV-P-216 Penetrating oil (can be obtained in spray can should be used in areas where grease would trap dust and present problems). NOTE Hinge  points  Include  screw  jacks,  landing  jacks,  leveling  jacks,  air  cylinders  and  any  other  pin components that rotate with use. Table 3-1. Lubrication Instructions 1. Control Van I t e m Description Lubricant Lubricant Temperature Range Period 1 WHEEL BEARINGS (Axles) (1) each side each axle GEARLUBE TOS 80W90 (MIL-L-2105 80W/90; GO - 80/90) Oil Cup -65 F to 275 F 100 hours 2 LANDING JACK (5) (3) gear side (2) other side GREASE-PRECISION EP- 2 (DOD-G-24508) Grease Gun 32 F to 225 F 100 hours 3 SUSPENSION CAMSHAFT (2) each side SLACK ADJUSTER (1) each side GREASE-PRECISION EP- 2 (DOD-G 24508) Grease Gun 32 F to 225 F 100 hours 4 SCREW JACKS Oil, PENETRATING (VV-L- 216) Spray Can -32 F to 225 F As Req. 5 HINGE POINTS Oil, PENETRATING (VV-L- 216) Spray Cam -32 F to 225 F As Req. 6 UPPER FIFTH WHEEL KINGPIN GREASE-PRECISION EP- 2 (DOD-G-24508) Grease, Hand 32 F to 225 F 100 hours page 3-2







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.