Burner control panel-select OFF on Main Flame selector switch.
Feeder panel-select DIVERT on the Divert selector switch.
Burner control panel-select CLOSED on Exhaust Shutter selector switch.
Motor control panel-press STOP button on Exhaust Fan.
Burner control panel-press STOP button on Burner Fan.
Continue to feed aggregate through the plant to extinguish the fire. DO NOT OPEN Drop Out gate. If fire
continues proceed as follows:
Keyboard-press ESCAPE, targets (1), 175, ENTER, ESCAPE to increase aggregate flow.
Monitor hot mix in conveyor and surge bin for flames. CheckContinue feeding aggregate into hot mix
until flames extinguished.
Continue a normal plant shut down.
Correct the problem.
Corner Panel-PRESS Emergency Stop button.
Electrical power Is Interrupted at the two motor control centers and to all equipment. Generators will continue to
run (electric power cables to control van are live).
To restore power turn on main breakers on motor control center 1 and 2.