TM 5-3895-374-24P
Parts Replacement Manual TM 5s3895-374.24P
For
Torque-Arm
Speed Reducers
Straight Bore & Taper Bushed
TXT815 - TXT825
SIZES: TXT915 - TXT926
TXT1015 - TXT1024
WARNING: Because of the possible danger to person(s) or property from accidents which may result from the improper
use of products, It is important that correct procedures be followed. Products must be used In accordance with the
engineering information specified In the catalog. Proper installation, maintenance and operation procedures must be
observed. The instructions in the instruction manuals must be followed. Inspections should be made as necessary to
assure safe operation under prevailing conditions. Proper guards and other suitable safety devices or procedures as may
be desirable or as may be specified in safety codes should be provided, and are neither provided by Reliance Electric
Industrial Company nor are the responsibility of Reliance Electric Industrial Company. This unit and Its associated
equipment must be installed, adjusted and maintained by qualified personnel who are familiar with the construction and
operation of all equipment in the system and the potential hazards involved. When risk to persons or property may be
involved, a holding device must be an integral part of the driven equipment beyond the speed reducer output shaft.
DODGE / P.O. Box 499 / 6040 Ponders Court / Greenville, S C. 29602-0499 / 803-297-4800
© Reliance Electric Company, 1990 DODGE, TORQUE-ARM and TRIMATIC
are trademarks of Reliance Electric Company or its affiliates
Printed In U S.A.
Instruction Manual 499347
5/92 6MK
page C6 - 6
