TM 5-3895-374-24P MATERIAL LIST For Drawing #70137-1 Shown On Reverse Side Item Part No. No. Req. Description 1 09832-01 1 Hanger, Front Right, Fabricated T-5562 1 Hanger, Front Right, Weld On Cast T-5424 1 Hanger, Front Right, Flange Mount 2 09832-01 1 Hanger, Front Left, Fabricated T-5563 1 Hanger, Front Left, Weld On Cast T-5425 1 Hanger, Front Left, Flange Mount 3 T-5497 8 Locknut 3/4" 4 T-5496 8 Washer 3/4" 5 **T-5488 2 Top U Bolt Plate 12 2 Spring 14 08595-01 1 Hanger, Rear Left, Fabricated T-5565 1 Hanger, Rear Left, Weld On Cast T-5429 1 Hanger, Rear Left, Flange Mount 15 08595-01 1 Hanger, Rear Right, Fabricated T-5566 1 Hanger, Rear Right, Weld On Cast T-5428 1 Hanger, Rear Right, Flange Mount 16 T-5544 2 Cap Screw ½"x 4 3/4" 17 T-1-7 4 2 Hex Nut ½" 18 T-1705 2 Lockwasher ½" 19 T-2106 2 Spring Roller 20 *09730-01 2 Axle Seat 21 1 Axle (Not Furnished) 22 T-5492 4 Torque Arm Bolt 1" x 6 3/4" 23 T-5495 4 Locknut 1" 24 T-2224 8 Compression Washer - Torque Arm 25 T-5493 8 Torque Arm Bushing 26 T-7635 1 Rigid Troque Arm - Front 28 1 Pipe Brace (Not Furnished) 29 *08554-01 4 U Bolt 31 15172-01 1 Adj. Torque Arm Assy. - Front 34 **T-5514 2 Bottom Plate (Inverted Mtg. Only) 35 ***T-5166 4 Spring Liner 37 ****T-7655 2 Spacer Block 2" Torque Arms Include: 15013-01 Left Hand End 15013-02 Right Hand End 11010-01 Locknut 3/4" 12916-01 Hx. Hd. Cap Screw 3/4" - 2½" *Use with 13, 14, 15" mounting height. With 16, 17, 18" use 08757-01 Axle Seat and 08561-01 U Bolts if using 11,000 pound capacity springs. U Bolts change with different spring capacities. **With Inverted mounting only, Item 5 is 11760-01 and Item 34 is used.  U Bolt change accordingly. ***Used with single and three leaf springs only. ****Used with single leaf spring. page C3 - 3