TM 5-3895-374-24-2 To Remove: 1 Loosen and remove all of the capscrews.  If the bushings      have      keyway      setscrews,   loosen them. 2 Insert   the   cap   screws   (three   in   JA   through   J bushings, two in QT and M through S bushings) in  the  threaded  holes  in  the  outer  piece  of  the assembly.    See  Fig..    4.    Progressively  tighten the  screws  until  the  mating  part  is  loose  on  the bushing. 3 Remove  the  mating  part  from  the  bushings  and the bushing from the shaft.  See Fig. 5. Fig.   4 Fig.  5 Sure-Grip Bushing: Screw Tightening Information T.  B.  WOOD’S SONS COMPANY    Chambersburg, PA T.  B.  WOOD’S CANADA LTD.    Stratford, Ontario 5-84Printed in U S A. Size & Ft.-Lbs. Wrench Wrench Tapered Thread of To Apply With Length Pull Bushing Cap Screw Torque Wrench (Inches) (Lbs.) QT 1/4 x 3/4 6 4 18 JA No. 10--24 5 4 15 SH -SDS--SD 1/4-20 9 4 27 SK 5/16 -18 15 6 30 SF 3/8 - 16 30 6 60 E ½ -13 60 12 60 F 9/16-12 75 12 75 J 5/8 - 11 135 12 113 M ¾ - 10 225 15 120 N 7/8 - 9 300 15 150 P 1 - 8 450 18 183 W 1 1/8 -7 600 24 167 S 1 1/4 - 7 750 30 167 page 3 - 859