TM 5-3895-374-24-2
IMPORTANT
WINGWEAR INSTALATION
INSTRUTIONS
INSTALL VENT PLUG BEFORE
INSTALLATION PROCEDURE:
PUTTING INTO SERVICE
1.
Install reducer in desired posi tion (see below).
2.
Remove lop plug and install Filler/Vent as illustrated below.
Be sure to use a thread sealant.
3.
Be sure to tighten Filler/Vent plug sufficiently to prevent
leakage of oil.
4.
The Filler/Vent plug should be installed with the vent hole
facing upward when In operation.
5.
For "T" Series. remove brass pin before operation.
page 3 - 734
