TM 5-3895-374-10
105
HINGE POINTS
Oil, PENETRATING (VV-
L-216) Spray Can
-32 F to 225 F
As Req.
106
UPPER FIFTH WHEEL
KINGPIN
GREASE-PRECISION
EP-2 (DOD-G-24508)
Grease Gun
32 F to 225 F
100 hours
11.
Hydraulic Power Pack
I
t
e
m
Description
Lubricant
Lubricant
Temperature
Range
Period
107
HYDRAULIC FLUID
HARMONY AW-32 (MIL-
H-46001 GRADE 1)
40 F to 125
100 hours
II.
PREVENTIVE MAINTENANCE PROCEDURES
3-2
Preventive Maintenance Checks and Service (PMCS)
This chapter provides instructions for inspection, servicing, lubrication and maintenance and repair of the M081 Asphalt
Mixing Plant. All procedures can be performed by personnel using common tools and equipment. All servicing and
maintenance must be performed at specified intervals for optimum performance and minimum down time.
Personnel should refer to the accompanying TM 5-3895-374-24 for information on servicing and repair procedures. Table
3-3 Unit PMCS lists periodic inspections and service to be conducted and the specific intervals at which they should be
performed. Intervals should be adjusted accordingly for extremes of temperature or other adverse operating conditions.
3-2.1.
Operation PMCS
CAUTION
Do not attempt to perform any service to the equipment while it is operating. The equipment Is to
be shut down for ALL service. During operation of the plant perform VISUAL inspection only.
page 3-13
