• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Figure 3-79.  Trailer Electrical System 12V - 24V
Mechanical Release

TM-5-3895-374-24-2 M081 Asphalt Mixing Plant Manual
Page Navigation
  672    673    674    675    676  677  678    679    680    681    682  
TM 5-3895-374-24-2 3-16 Trailer Air Brakes 3-16-1 Trailer Air Brake System The following chart lists the Asphalt Mixing Plant trailers and the relevant figure number of the diagram showing the trailer air  brake  system.    Refer  to  the  Parts  Manual  TM  5-3895-374-24P  for  additional  information  and  a  description  of  the components shown on the diagrams. Trailer Figure Number Control Van 3-81 Four Bin Feeder 3-81 Feed Conveyor 3-80 Drum Mixer 3-82 Surge Bin 3-85 Baghouse 3-81 Generator Trailer 3-83 Dedrummer/Melter 3-81 Asphalt Tanker 3-81 Dolly 3-84 3-16-2 Brake Adjustment Maintenance personnel should be trained to make brake adjustments.  If adjustments to the trailer brakes are required the following steps are recommended for "S" cam brakes: 1. Block the wheels, release spring brakes and shut off the prime mover engine, leaving it in low gear.  Check the push rod travel by pulling on a slack adjuster by hand or with a pry bar.  If slack (push rod travel) exceeds 3/4 inch, brake adjustment is required. page 3 - 1375







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.