Clean the strainer assembly and replace the basket if necessary.
Install the electric motor to the base and hand tighten the fasteners. Connect the wiring in the junction box
following the markings made to the wires at disassembly. The ground strap must be reinstalled to the
Install the coupling flanges and sleeve and position the pump. Align the coupling following the instructions in
Install the fasteners holding the pump and tighten. Tighten the fasteners holding the electric motor. Install
the coupling guard.
Reassemble the strainer and install it in the line.
Connect the fuel lines to the pump.
Open the valve between the fuel pump and the tank.
Remove padlock from the breaker and turn breaker on.
page 3 - 866