TM 5-3895-374-24-1
The Following
Probable Cause
Recommended Action
Error Exists
1. Monitor program file online and Identify
programmed forces
System does
User programmed
2. Enable appropriate forces and test system
not operate per
forces are not
conditions again Once forces are enabled, the
programmed
enabled
FORCE LED goes on steady
forces
Refer to the Advanced Programming Software User
Manual (1 747-NM002)
The Following
Probable Cause
Recommended Action
Error Exists
1. Verify battery is connected See pages 51 and 8-5
2. Replace the battery See page 8-5
CPU Major
Loss of RAM
Error with Low
during Power
3 Refer to processor major fault recommended action
or No Battery
Down Period
steps
Back-up
Refer to the Advanced Programming Software User
Manual (1747-NM002)
Refer to the following key to determine the status
of the LED indicators
Indicates the LED Is OFF
Indicates the LED Is ON
Indicates the LED is FLASHING
Status of LED does not matter
Regardless of any other LED status Indicator
conditions, always replace the battery when
the BATT LED Is on if you want RAM battery
backup
Chapter 9
Troubleshooting
(page 3-449)