• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Terminal strips
ALTIVAR 37 to 90 kW - TM-5-3895-374-24-1_199

TM-5-3895-374-24-1 Paving Machine Bituminous Material: Crawler Mounted Diesel Engine Driven Manual
Page Navigation
  152    153    154    155    156  157  158    159    160    161    162  
TM 5-3895-374-24-1 Connections ALTIVAR 0,75 to 30 kW Terminal strips Item Function Characteristics ATV-452•••M ATV-452••• ATV-452•••N ATV-452•••S L1 220/240 V 380/415 V 440/500 V 525/575 V L2 Power supply - three phase +10 % -15% +10 % -15 % +10 % -15 % +10 % -15 % L3 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz CL1 0V 0V 0V 0V CL2 CL 21 Control supply - single phase 220/240 V 380V (Un <400V) 440V(Un < 480V) 525/575 V CL22 (if necessary remove the terminal cover) 415V (Un >400V) 500V (Un> 480V) U/T1 V/T2 W/T3 Output connections to the motor 220/240V at 50/60 Hz 380/415 V at 50/60 Hz 440/500 V at 50/60 Hz 525/575 V at 50/60 Hz + - Smoothed Intermediary DC voltage 290 tp 435 500 to 750 V 550 to 800 V 650 to 1000 V Ll1 Logic Input 1 24 V (minimum 19 V, maximum 30 V), Ze = 1,5 kQ J0 L12 Logic Input 2 24 V (minimum 19 V, maximum 30 V), Ze = 1,5 kQ PL Control Input supply 24 V, Is = 40 mA maximum OEl Speed reference Input common 0V El Input 1 - Speed reference voltage 0 - 10 V, Ze = 28 kn 10 V, Is = 10 mA P0l Output voltage E2 Input 2 - Speed reference voltage 0 - 10 V, Ze = 28 kQ EC Input 3 - Speed reference current 0 - 20 mA, 4 - 20 mA, Ze = 100 Q J1 A01 Analogue output 1 0 - 20 mA, 10 V maximum A02 Analogue output 2 0 - 20 mA, 10 V maximum PL Control Input supply 24 V, Is = 60 mA maximum NL Negative supply -15 V, Is = -10 mA maximum RV Reverse control Input 24 V i minimum 19 V, maximum 30 V, Ze = 1,5 kQ FW Forward control input 24 V I DCB DC Injection braking control Input 24 V J2 SA SB Fault relay output Closes when supply is switched on fault Voltage free contact (220/240 V, 50/60 Hz, 2 A maxi) SN+ Speed sign Braking and speed regulation option (p 62[72) 0 - 5 V, Ze = 10 kQ Inputs not isolated from the mains   J3 OVN Common SGN Speed signal PN Option present 1 REC- (current loop receiver) 2 RX (reception RS232C) Communication with compatible microcomputer, programmable controller terminal by serial link 3 TX (transmission RS232C) or J4 4 Reserved 5 GND (common RS232C) and EMI- 6 REC+ (current loop receiver, +15 V) 7 Reserved 8 Reserved 9 EMI+ (current loop transmitter) (page 3-170)







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.