TM 5-3895-374-10
...........................................................................................................................................INFORMATION display/divert valve
The bottom area of all screens is reserved for the display of status messages, timers, warnings and current time and date.
The asphalt valve status display is shown in Figure 0.4.
At the left edge of the information area is a two line display defining the position of the liquid asphalt RUN/DIVERT valve.
The possible messages are:
’Asphalt Spray’ ---- liquid asphalt is being injected into the drum, i.e., the asphalt valve is in the
RUN position.
’asphalt divert’
---
liquid asphalt is being returned to its storage tank, i.e., the asphalt valve is
in the DIVERT position.
’divert locked’
---
the asphalt valve is in the DIVERT position and the computer cannot cause
this valve to switch to the run position.
’asphalt error’
---
the asphalt valve is not in the same position expected by the computer.
page F - 17
SYSTEMS Equipment Corp
8/31/89
Page (10)
